Bouldering Mats: Designed by Climbers and UK Made

By Alpkit

We have more experience than we’d care to disclose in falling off boulder problems. In fact, we’ve fallen off boulders all over the world, so it was only natural that we’d want to make things that we could fall onto.

Bouldering pads were one of the very first products we designed. We knew that Alpkit pads would have to use top quality, durable materials and be built to last. Our bouldering mats have been proven in some of the best bouldering areas in the world: the Peak District, Rocklands, Val di Mello, Fontainebleau, Magic Woods and Albarracin — to name just a few.

We take enormous pride in the quality of our pads and it gives us a real buzz knowing that climbers trust them to seek out inspiring lines — some even developing into British and World champions. But there were plenty of things to consider when developing our range: 

  1. Selecting the best foam for the job
  2. Choosing fabrics that are built to last
  3. Developing a comfortable carrying system
  4. Paying attention to the finer details
  5. Designed and made by climbers

Tackling an overhanging bouldering problem in Slovenia

Selecting the best foam for the job

We’ve looked at more foam than is frankly healthy over the years. But safety isn’t something to scrimp on, especially when climbing. We’ve worked tirelessly to find the best combination of foam to hit the sweet spot between impact absorption, durability, and weight. You can find out even more info in our blog on bouldering mat foam but here’s a quick overview.

Using top quality foam
The foam we’re currently using is thicker than in previous incarnations, partly to work with the shape of our pads and partly because boulderers are increasingly using thicker foam. Our pads tend to feel firm in comparison to other brands, but this firmness doesn’t necessarily mean you’ll get a hard fall. What it does mean though is that your fall will be better supported – protecting your heels and ankles - and your pad will last longer.

The right foam sandwich
Our Mujo and Origin pads are designed to cover the majority of boulderers’ needs, so it was important to find a good balance between protection on higher falls and comfort on smaller falls. We chose to use two layers of foam: open cell to absorb impact and cushion the smaller falls and closed cell to prevent you from bottoming out on higher falls.

The Project is made to handle repeated big falls including high ball problems, so we added another layer of closed cell foam to give you the extra support from the high falls and more protection against rocks or uneven ground beneath the pad.

Climber Anna Wells tackling a high boulder problem

Choosing fabrics that are built to last

The fabric on your bouldering pads sees more rough use than almost any other piece of outdoor gear. As well as protecting that valuable foam from damage, it has to be dragged in and out of car boots, laid on rough ground and squeezed into awkward gaps.

Our bouldering pads are made here in the factory at Alpkit HQ. This means we’ve been able to test a huge range of fabrics on-site to make our pads as hardwearing as possible.

Cordura Nylon®
We opted for 1100 denier Cordura®, a fabric we’ve had a lot of experience working with. Cordura® is a brand of high tenacity nylon (or nylon 6,6). These nylon fibres have extremely high levels of tear strength and abrasion resistance (greater than standard nylon fibres), making them exceptionally hardwearing.

Using a large thread diameter (that’s the ‘denier’ bit) for the fabric makes our pads even more durable for years of bouldering on rough ground. This fabric has proven it can stand the test of time and a good dose of use and abuse.

Hati and Seb tackling a bouldering problem in the Peak District

Developing a comfortable carrying system

There’s no point in having a great pad if you can’t carry it to the crag. With the exception of the streamlined Phud and the Waffa sit pad, our pads all feature rucksack straps and hip belts to make them more comfortable to carry. A lot of testing has gone into situating the carry system at the right height to avoid the pad hitting the backs of your knees or sending you head over heels down the first slope you come across.

 Due to its size and weight, portability was a big point of discussion for the Project pad. We decided to use a thermoformed rucksack back panel – like the ones we use on our rucksacks – to make it comfortable to carry on the long walk-ins to your project.

Carrying a bouldering mat into a project in Slovenia

Paying attention to the finer details

We’ve been making bouldering pads here in our Nottinghamshire factory since 2011. Having production right next door means we can ensure the highest levels of manufacturing standards and quality control. That’s why all our pads come with a 25 year Alpine Bond. All our pads are bar-tacked and double-stitched to ensure they don’t split at the seams when you take a big fall.

One of the major changes in our pad range is the corners, which are now squared-off (yes, really, it’s a big deal to us!). Pads with squared off corners fit together better, with less gaps in between, giving you a safer setup. They’re also far easier to stack. Having squared-off corners does result in slightly less durability than our old designs. But using bombproof 1100D Cordura® more than makes up for this trade-off.

Seb clinging on at the top - Bouldering in the Peak District

Designed and made by climbers

Alpkit isn’t just a name above the door or a logo on a product: it’s the people who work here and the people who use and trust our products day in, day out. Our factory team are a real mix of characters with mad keen climbers working alongside experienced machinists from the local textile industry. It’s a real melting pot of shared experiences, skills and ideas!

Our factory may be small but our team's skill and experience means we are able to make constant tweaks and improvements to our range, innovating a we go. Some developments make small advances, others great leaps. Sometimes they’ve come back from a session at the crag with an idea for a pad, made a prototype the next day, tested it that evening, and then put it into production in a matter of days. You wouldn't get that with a mass-produced pad!

Leave a comment

Please note, comments must be approved before they are published